All Posts

First aid unit standards NZ: 6400, 6401 and 6402 explained

First aid unit standards NZ: 6400, 6401 and 6402 explained

First aid unit standards 6400, 6401 and 6402 are the NZQA (New Zealand Qualifications Authority) standards that many NZ first aid courses are assessed against. Standard 6402 covers basic life support, 6401 covers first aid and 6400 covers managing an emergency scene. NZQA has published replacement skill standards, 41051 and 41053, and the old ones expire on 31 December 2027.

What are the first aid unit standards 6400, 6401 and 6402?

They are three NZQA standards that set out what a learner must show to be assessed as competent in first aid. Each one covers a different part of first aid.

  • 6402, Provide basic life support (level 2): the core emergency skills, from the DRSABCD action plan to CPR and using an AED.
  • 6401, Provide first aid (level 2): first aid for common injuries and medical emergencies. Unit standard 6402 is its prerequisite.
  • 6400, Manage first aid in an emergency situation (level 3): taking charge of a scene with more than one casualty. Unit standard 6401 is its prerequisite.

In plain terms, 6402 is the foundation, 6401 adds the wider first aid content and 6400 adds scene management. A course can be assessed against one, two or all three, which is why two first aid certificates can look quite different.

Which standards does each MediTrain first aid course list?

It depends on the course. These are the standards listed on each course page.

For a course-by-course comparison, read our guide to first aid certificates. This article focuses on the standards themselves and what is changing.

Are the unit standards being replaced?

Yes. NZQA's November 2025 change report says three new skill standards, 41051, 41052 and 41053, replace the 6400 series. The old standards are due to expire on 31 December 2027.

Providers that are already approved to assess the old standards have that approval carried across to the new ones.

The skill standards were republished in April 2026. The reference to the First Aid as a Life Skill document was removed and the ANZCOR guidelines now take its place. ANZCOR is the Australian and New Zealand Committee on Resuscitation, which publishes the resuscitation and first aid guidelines used in both countries.

Does WorkSafe require a particular unit standard?

No. WorkSafe recommends that workers are trained in first aid by an organisation accredited by NZQA, but its first aid guidance does not require a specific course, provider or certificate.

The duty itself sits in regulation 13 of the Health and Safety at Work (General Risk and Workplace Management) Regulations 2016. A PCBU (person conducting a business or undertaking) must provide adequate first aid equipment, make sure workers can get to it and to first aid facilities, and either have an adequate number of workers trained in first aid or give workers access to an adequate number of other trained people. In deciding what is adequate, it must consider the nature of the work and its hazards, the size and location of the workplace, and the number and composition of the workforce. There is no fixed number of first aiders.

So a course assessed against these standards can help meet your duty, but it does not guarantee it. Our post on workplace first aid requirements in NZ goes through what to think about.

What does this mean for renewing a certificate?

First aid certificates are commonly valid for two years, so check the date on yours and confirm the rules with your provider. WorkSafe describes a first aid certificate as generally valid for two years, and the same is true for MediTrain certificates.

Skills fade without practice, so refreshing them matters whatever the date on the certificate says. Our First Aid Refresher course is for people who hold a current or recently expired first aid certificate from any provider.

If you are unsure whether a certificate is still current, ask the provider that issued it.

Frequently asked questions

What does unit standard 6402 cover?

Unit standard 6402 (Provide basic life support) covers the DRSABCD action plan, CPR, when and how to attach an AED, choking in adults, children and infants, life-threatening bleeding, and shock and the recovery position. It is the basic life support standard, and it sits underneath 6401 as a prerequisite.

How can I find out which standards my first aid certificate was assessed against?

Start with the certificate itself, then the course page for the course you did, or ask the provider that issued it. Refresher eligibility depends on the standards shown on your previous certificate.

Does a unit standard mean I am ready for any emergency?

No. A standard sets what a course assesses. The course gives you practice on a manikin, a clear action plan and the confidence to act until help arrives. Skills fade, so keep practising and refresh them. In an emergency, always call 111.

Check the standards before you book

Pick the course that matches the standards you need, then check current prices and dates on its course page. If you are organising training for a team, ask about onsite first aid training for teams.

This article is general information and doesn't replace a first aid course or medical advice. Reviewed against NZQA, WorkSafe and legislation.govt.nz sources current at November 2026.

Ready to get certified?

Start your course today and gain the confidence to respond when it matters most.

First aid training session