If your employer, early childhood licence or registration body has asked for a first aid certificate with specific unit standards, this is what they mean.
- 6402 Provide basic life support (level 2). CPR, AED use, choking and the recovery position.
- 6401 Provide first aid (level 2). Responding to injuries and illnesses: bleeding, burns, fractures, medical emergencies.
- 6400 Manage first aid in an emergency situation (level 3). Taking charge of a first aid situation, including more than one casualty, until help arrives.
MediTrain's Comprehensive Workplace and Comprehensive Childcare courses carry all three. The Basic Workplace course carries 6401 and 6402, and the CPR course carries 6402 on its own.
One more thing to know before you read on: these three standards are being replaced. New skill standards 41051, 41052 and 41053 map one to one onto 6400, 6401 and 6402, and the old numbers expire on 31 December 2027. More on that below.
What a unit standard is
A unit standard is a nationally registered statement of what a person must be able to do, assessed by an accredited provider and recorded by NZQA. First aid training in New Zealand is built on three of them, looked after by Toitū te Waiora, the Workforce Development Council for the sector. When you pass a MediTrain course the standards are reported to NZQA and sit on your Record of Achievement, under your National Student Number, for life.
That matters for two reasons. The standards are what an employer or licensing body is really checking, whatever the course is called. And they are a permanent record, so even if you lose the paper certificate, the fact that you completed the course and when is still on file. If you have lost your certificate, email enquiry@meditrain.co.nz and the office will send a copy at no cost.
6402: Provide basic life support
This is the life-saving core: recognising when someone is not breathing normally, calling for help, CPR on adults, children and infants, using an AED, managing choking, and placing an unconscious breathing person in the recovery position. It is assessed by doing, which is why it cannot be earned online. Every MediTrain first aid course includes it, and the CPR course is built around it.
6401: Provide first aid
This covers responding to the injuries and illnesses a first aider is likely to meet: bleeding and wounds, burns, fractures and soft tissue injuries, and medical emergencies such as chest pain, stroke, seizures, severe allergic reaction and diabetic emergencies. Again it is assessed through practical scenarios. Basic and Comprehensive courses both include it.
6400: Manage first aid in an emergency situation
This is the one that trips people up. It sits a level above the other two and covers managing a first aid situation rather than just treating one person: assessing the scene, prioritising when there is more than one casualty, directing others, and handing over to emergency services. Early childhood centres and higher-risk workplaces are the most likely to ask for it, and it is the standard the Basic course does not include. If a requirement names 6400, book a Comprehensive course.
Which course gives you which standards
- Comprehensive Workplace First Aid: 6400, 6401, 6402.
- Comprehensive Childcare First Aid: 6400, 6401, 6402.
- Basic Workplace First Aid: 6401, 6402.
- CPR and Basic Life Support: 6402.
- First Aid Refresher: no new unit standards. You already hold them; see below.
Each course page lists its standards, hours and current price. See all first aid courses.
Why a refresher does not award the standards again
Unit standards are earned once. You cannot be awarded the same standard twice, in the same way you cannot be issued the same driver's licence twice. The First Aid Refresher keeps your certificate current for another two years and reassesses your skills, but it does not report new credits to NZQA. Your refresher certificate notes which standards you are refreshing, provided your previous certificate showed them. If it did not, the new certificate simply says First Aid Refresher.
This also means your NZQA Record of Achievement shows the date you first earned the standards, not your most recent refresher. For proof that you are current, the certificate is the document that counts. A certificate is valid for two years, with a three-month window after that in which it can still be renewed by a refresher rather than a full course.
The new skill standards: 41051, 41052 and 41053
Toitū te Waiora has reviewed the first aid standards, and NZQA has registered three skill standards to replace them. They map directly onto the old numbers:
- 41051 Manage first aid during emergency situations (level 3) replaces 6400.
- 41052 Administer first aid (level 2) replaces 6401.
- 41053 Administer basic life support (level 2) replaces 6402.
Unit standards 6400, 6401 and 6402 expire on 31 December 2027. Until then providers can keep assessing against them, and providers already approved for the old standards have that approval carried across to the new ones. The content of a first aid course does not change in any way you would notice as a learner; what changes is the number printed on your certificate once your provider makes the switch.
If your certificate lists 6400, 6401 and 6402, it stays valid until its own expiry date. If an employer or licensing body asks for the new numbers before you are due to renew, the mapping above is the answer: they are the same qualification under a new number.
What happened to unit standard 25459?
Unit standard 25459 was an older first aid standard used mainly in early childhood. It was retired on 31 December 2025. If your current certificate lists 25459 it remains valid until its expiry date, but when you renew you will move to 6401 and 6402 (and 6400 if recommended for your role). Home-based educators without a current certificate have needed 6401 and 6402 since 1 January 2026.
Are these the same as the Australian HLTAID units?
No. Australia uses its own units, such as HLTAID011 Provide first aid, and they are not New Zealand qualifications. An Australian certificate cannot be refreshed in New Zealand, so someone moving here needs a New Zealand course to earn the standards.
Reading the standards on a certificate
A New Zealand first aid certificate shows the provider, your name, the date of issue and the unit standards achieved. When checking a certificate for your workplace or centre, look for the standard numbers rather than the course name, and check the date of issue against the two-year validity period. Our guide to getting a first aid certificate in NZ covers the rest of the process.
Quick answers
What is unit standard 6400?
Manage first aid in an emergency situation. Taking charge of a first aid scene, including multiple casualties. Included in Comprehensive courses, not Basic.
Do I need 6400?
If your employer, early childhood licence or registration body names it, yes. The Ministry of Education recommends it for early learning staff.
Does a refresher give me the unit standards again?
No. They are awarded once and stay on your NZQA record. The refresher renews your certificate.
Is my 6400, 6401, 6402 certificate still valid after the new standards arrive?
Yes, until its own expiry date. The old standards expire for new assessment on 31 December 2027; existing certificates are not cancelled.
Get the standards you need
See all first aid courses. Many of our instructors come from paramedic, nursing or healthcare backgrounds, and whichever course you choose, the assessment is done by doing. The standards are current as at the date shown at the top of this page; NZQA and Toitū te Waiora publish the official versions.




